Setting Up The Monitor; Removing The Stand's Hinge Blocker - HP 25x User Manual

Setting up the monitor

WARNING!
workstation setup and proper posture, health, and work habits for computer users. The Safety & Comfort
Guide also provides important electrical and mechanical safety information. The Safety & Comfort Guide is
available on the Web at http://www.hp.com/ergo.
IMPORTANT:
panel may cause nonuniformity of color or disorientation of the liquid crystals. If this occurs, the screen will
not recover to its normal condition.
IMPORTANT:
control buttons, position the monitor facedown on a flat surface covered with protective sheet foam or a
nonabrasive cloth.

Removing the stand's hinge blocker

The monitor is shipped with a hinge blocker that locks the monitor head in the lowest height position on the
stand. You must remove the hinge blocker to adjust the height of the monitor head.
To remove the hinge blocker, gently press down the monitor head (1) and pull the hinge blocker out of the
stand (2).
4 Chapter 1 Getting started
To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper
To prevent damage to the monitor, do not touch the surface of the LCD panel. Pressure on the
To prevent the screen from getting scratched, defaced, or broken and prevent damage to the