Connecting Usb Devices - HP 25x User Manual

Connect one end of the AC power cord to the AC adapter (1) and the other end to a grounded AC outlet

(2), and then connect the AC adapter to the power connector on the monitor (3).

WARNING!

Do not disable the AC power cord grounding plug. The grounding plug is an important safety feature.

Plug the AC power cord into a grounded (earthed) AC outlet that is easily accessible at all times.

Disconnect power from the equipment by unplugging the AC power cord from the AC outlet.

For your safety, do not place anything on power cords or cables. Arrange them so that no one may

accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging the AC power

cord from the AC outlet, grasp the cord by the plug.

Connecting USB devices

The rear of the monitor provides one USB Type-B upstream port and two USB Type-A downstream ports.

NOTE:

You must connect the USB Type-B upstream cable from the source device to the monitor to enable

the USB Type-A downstream ports on the monitor.

To reduce the risk of electric shock or damage to the equipment:

Setting up the monitor

Table of Contents

Monitor HP LP3065 User Manual
30" lcd monitor (33 pages)
Monitor HP 2011x User Manual
Hp 2011x: user guide (47 pages)
Monitor HP E243M User Manual
Elitedisplay (38 pages)
Monitor HP EliteDisplay User Manual
Led backlit monitors (31 pages)
Monitor HP Pavilion f1904 User Manual
Hewlett-packard lcd monitor user's guide (46 pages)
Monitor HP Z30i Specification
30-inch ips display (9 pages)
Monitor HP Compaq LA2405WG User Manual
Hp compaq la2405wg: user guide (52 pages)