Basic Call Features; Additional Information - Gigaset Maxwell 3 Quick Start Manual

Gigaset pro Maxwell 3
Introduction
This quick start guide demonstrates key features of the
Gigaset Maxwell 3 combined with the 3CX platform and
is designed to help you learn the basics quickly.
Please note that most of the functions described here
depend on the features assigned to the account to be
used with the telephone. Some of the features can be
configured and enabled by you and/or by your admini-
strator.

Basic Call Features

Call Transfer Attended
Call Transfer Un-Attended
Blind Transfer
Call swapping
Conference Call

Additional Information

Additional information is available and can be found:
! This quick start guide is based on the software dd: May 2019,
Maxwell 3.13 and the 3CX Version 16
Call forward always
Call forward busy
Call forward No Answer
Busy Lamp Field (BLF)
Phonebook
Feature codes
http://wiki.gigasetpro.com
Basic Call Features
The following basic call features are supported.
Feature Action
Make Call > Enter the number and lift the handset.
> Enter the number and press the
> For handsfree enter the number and press
> For headset enter the number and press
You can switch between handsfree,
handset at any time during the call.
End active call > Hang up the call.
> In handsfree mode press
> In headset mode press
Answer incoming call > Lift the handset.
> Or press
> Or press
Reject incoming call > Press the Left Soft key
Quick start guide
centre key.
headset
or
Reject
2