Optional Equipment; Thread Cutting Oil Information; Machine Storage; Service And Repair - RIDGID 1224 Manual

optional equipment

WARNING
To reduce the risk of serious injury, only use equip-
ment specifically designed and recommended for
use with the 1224 Threading Machine.
Catalog Model
No. No, Description
26212 764 ¼" to 4" Wheel-Type Cutter
26217 744 ¼" to 4" Blade-Type Reamer
34577 – ¼" to 4" Reamer Blade
26187 – Jaw Insert and Roll Set for PE-Coated Pipe
Die Heads
26132 711 Universal Self-Opening R.H., NPT
26142 713 Universal Quick-Opening L.H., NPT
26152 714 Receding Self-Opening R.H., NPT
26137 911 Universal Self-Opening R.H., BSPT
26147 913 Universal Quick-Opening L.H., BSPT
26157 914 Receding Self-Opening R.H., BSPT
26162 541 Quick-Opening Bolt L.H./R.H. (¼" to 1" sizes)
26167 542 Quick-Opening Bolt L.H./R.H. (1
55447 725 Cut-Grooving Die Head
57497 – 2 1 / " to 3 1 /
2 2
57507 – 2 / " to 3 /
1 1
2
57492 – 4" Grooving Die Set
57502 – 4" Grooving Bit only
55452 766 Blade Type Cutter
58712 – Cut-Off Tool Bit (for 766)
Stands
92457 100A Universal Leg & Tray Stand
92462 150A Universal Wheel & Tray Stand
92467 200A Universal Wheel & Cabinet Stand
22563 – Steel Cabinet
Nipple Chucks
51005 819 Nipple Chuck
68160 819 Nipple Chuck
34157 419 Nipple Chuck 2
34162 419 Nipple Chuck 3" NPT
34167 419 Nipple Chuck 4" NPT
34172 419 Nipple Chuck 2
34177 419 Nipple Chuck 3" BSPT
34182 419 Nipple Chuck 4" BSPT
For a complete listing of RIdGId equipment avail-
able for the 1224 Threading Machine, see the Ridge
Tool Catalog online at RIdGId.com or call Ridge
Tool Technical Service department (800) 519-3456,
from the u.S. and Canada.

Thread Cutting oil Information

Read and follow all instructions on the threading oil label
and Safety Data Sheet (SDS). Specific information about
RIDGID Thread Cutting Oils, including Hazard Identi fi ca -
tion, First Aid, Fire Fighting, Accidental Release Measures,
Handling and Storage, Per sonal Protective Equipment,
Disposal and Transportation, is included on the container
and SDS. SDS is available at RIDGID.com or by con-
tacting Ridge Tool Technical Service Department at (800)
519-3456 in U.S. and Canada or rtctechservices@emer-
son.com.
940-713-030.09_REV. G
1 / " to 2 " sizes)
8
" Grooving Die Set
" Grooving Bit only
2
1 / " to 2" NPT
2
1 / " to 2" BSPT
2
1 / " NPT
2
1 / " BSPT
2
1224 Threading Machine

Machine Storage

The Threading Machine must be kept
WARNING
indoors or well covered in rainy weather. Store the machine
in a locked area that is out of reach of children and people
unfamiliar with threading machines. This machine can
cause serious injury in the hands of untrained users.

Service And Repair

WARNING
Improper service or repair can make machine
unsafe to operate.
The Maintenance Instructions will take care of most of the
service needs of this machine. Any problems not ad -
dressed by this section should only be handled by an
authorized RIDGID service technician.
Tool should be taken to a RIDGID Independent Service
Center or returned to the factory. Only use RIDGID service
parts.
For information on your nearest RIDGID Independent
Service Center or any service or repair questions:
• Contact your local RIDGID distributor.
• Visit RIDGID.com or RIDGID.eu to find your local
RIDGID contact point.
• Contact Ridge Tool Technical Service Department at
rtctechservices@emerson.com, or in the U.S. and
Canada call (800) 519-3456.

disposal

Parts of the Threading Machine contain valuable mate-
rials and can be recycled. There are companies that
specialize in recycling that may be found locally. Dispose
of the components and any waste oil in compliance with
all applicable regulations. Contact your local waste man-
agement authority for more information.
For EC Countries: Do not dispose of elec-
trical equipment with household waste!
According to the European Guideline 2012/ -
19/EU for Waste Electrical and Electronic
Equipment and its implementation into nation-
al legislation, electrical equipment that is no
longer usable must be collected separately and disposed
of in an environmentally correct manner.
19