Initial Dryer Startup; Dryer Pre-Check; Explanation Of Password Levels; Welcome Screen - NovaTec NovaWheel NWB- DC+ Series User Manual

16.0 INITIAL DRYER STARTUP

16.1 Dryer Pre-Check

NOTE: Assure voltage, connection and phasing are cor-
rect, cooling water is supplied (for drying over 225°F) and
thermocouple is inserted in hopper.
Connect material source to Hopper Loader
Turn Main Disconnect Switch to "ON" position.
On first start you should enter Information requested on

WELCOME screen.

NOTE: Username setup and password 4444 is required
for initial setup. If the proper level of password protec-
tion has not been entered prior to attempting changes,
the alpha/numeric password entry keypad will appear,
prompting the user to input the proper password before
changes can be made.
Setup username and password will not be required after
initial setup except to change other usernames and
passwords.

16.2 Explanation of Password Levels

User name and Password factory defaults (below) should
be updated to ensure proper access.
To do that, double-tap the ******** after each Level and
enter the new password on the alpha/numeric screen
that will appear.
You will be prompted to enter the password twice. Press
to return to USERS MANAGEMENT screen.
User names and Password factory defaults (below)
should be updated to ensure proper access.
Level1: 1111(Operator) – Can choose pre-set recipe and
run it.
Level2: 2222 (Production Supervisor)
– level1 plus can change recipes, set clock & Auto
START/STOP
Level3: 3333 (Maintenance) Same as level 2
Setup: 4444 Required for Initial setup
Setup: can change passwords for all levels
Level 3 can change Level 3 passwords
Level 2 can change Level 2 passwords
Level 1 can change Level 1 passwords
16.3 WELCOME Screen (setup username and password
4444 required for initial setup)
Pressing METRIC will change °F to °C.
Press the Forward Arrow to TIME and DATE
16.4 Verify/Set Time & Date
If corrections are required, press date or time box.
Select NONE on drop-down if
Daylight Savings Time does
not apply.
An alpha-numeric screen will appear. Enter date as xx/
xx/xx and time as xx:xx:xx AM or PM.
Press after each entry is complete.
To have time follow Daylight Savings Time in your
geographic area, choose area from dropdown and press
SAVE.
Setting date and time assures that alarms
will have correct date & time stamp.
16
Press the SAVE icon to save
the time and date.