Introduction - Fichtelbahn OpenDCC BiDiB LightControl V1.3 Manual

Introduction

These instructions refer to the BiDiB / DCC decoder "LightControl " from OpenDCC and Fichtelbahn.
The decoder gets on not as a commercial ready product, but is a development aid or kit for technically interested
railroad modeler for the own construction.
Here once again a clear tip:
The decoder and these instructions were checked carefully and provided after the best knowledge. For the
information presented here no claim to completeness, actuality, quality and correctness is raised. No responsibility for
the damages which originate from the trust in the contents of these instructions, to the decoder or their use can be
taken over.
The software of the decoder can be downloaded on our Internet site , may be extended by everybody uses, and be
improved.
A commercial use of the software or parts from it are not permitted!
Warranty
The use of this manual is permitted only for the reproduction and the personal use of the described stone. An other use
needs the written approval of the author.
For the reproduction and its functions of the described stone the author assumes no liability.
The operator is responsible for the observance of existing regulations and the regular use of the product alone.
Reference:
RailCom® and RailComPlus® are regisrtered trademarks
of Lenz Elektronik GmbH and
ESU electronic Solutions Ulm GmbH & Co. KG.
for the rise of the legibility of the text have we refuses to refer by every use of the concept to it.
Manual to build the SMD pre fitted Hardware manual-Version V1.4-en page 3