Table of Contents
Advertisement
step 6: 4x servo-outputs:
The 4 servo ports can be used for raiload effects also for
servo railroad switches.
To the usage of this function still five pin headers JP3, JP4,
JP5, JP6 and JP9 / J12 must be equipped on the top.
CAUTION: Short circuit danger:
With JP9 / JP12 5 V of Servo care can be impaled
externally or 5 V of supply be measured. For internal 5 V of
Servo supply the Pins 2 and 3 must be connected by a
jumper.
Manual to build the SMD pre fitted Hardware
manual-Version V1.4-en
page 12
Advertisement
Table of Contents
