Traffic And Weather Source; Table B-4 - Compatible Traffic And Weather Sources - Garmin G3X Touch Maintenance Manual

B.4 Traffic and Weather Source
MFR Model
Garmin GTX 33(ES) RS-232
GTX 330(ES)
GTX 32
GTX 327
GTX 328
GTX 325 RS-232
GTX 335
GTX 335R
GTX 345 RS-232
GTX 345R RS-232
HSDB (w/
GTN or GTS)
Maintenance Manual
G3X Touch EFIS Part 23 AML STC
Table B-4 – Compatible Traffic and Weather Sources
Data G3X Configuration Setting
Format
Transponder Configuration Page:
Transponder Type: "GTX 32" or "GTX
33" or "GTX 33ES" or "GTX 327" (1) or
"GTX 328" (1) or "GTX 330" (1) or "GTX
330ES" as appropriate.
(3)
Note: No GSU configuration is required
Transponder Configuration Page:
Transponder Type: "GTX 325" (1) or
"GTX 335" (1) or "GTX 335R as
appropriate.
GTX 335R Connected to Garmin
Navigator for Position Source for
ADS-B Out
Transponder Configuration Page:
RS-232 Port 'x': 'ADS-B+ GPS"
(3)
NOTE: No GSU configuration is
required
NOTE: "x" = Connected Port #
Transponder Configuration Page:
Transponder Type: "GTX 345" (1)
On-screen Controls: "Show" (if
desired) or "Hide"
RS-232 Configuration Page:
RS-232 Port 'x': 'Connext 57600 Baud"
(GDU port connected to GTX) (2)
- For Traffic/Weather (if no other
source is connected)
The GTX 345 also provides FIS-B
weather data with this interface.
NOTE: No GSU configuration is
required
NOTE: "x" = Connected Port #
Transponder Configuration Page:
Transponder Type: "GTX 345R"
RS-232 Port 'x': 'Connext FMT 1"
(GTX port connected to GDU)
RS-232 Configuration Page:
RS-232 Port 'x': 'Connext 57600 Baud"
(GDU port connected to GTX) (2)
For Traffic/Weather (if no other source
is connected)
Page B-6
Interfacing Equipment
Configuration Setting
GTX RS-232 Config Mode Page:
RS-232 Input: "Remote"
Input/Output Format: "XPDR FMT 1"
GTX 328/330 Squat Switch Config
Mode Page:
Squat Switch: "NO"
GTX 325/335 RS-232 Set Up Page:
RS-232 CH 1 (Connected to GSU 25D:
"XPDR FMT 1"
For ADS-B
GTX 335 RS-232 CH (Connected to
Garmin Navigator) Input: "ADS-B+"
GTN/GNS RS-232 Configuration
Page:
RS-232 CH (Connected to GTX)
Output: "ADS-B+ Format 1"
GTX RS-232 Set Up Page:
RS-232 CH 1 (Connected to GSU 25D)
Input/Output Format: "XPDR FMT 1"
RS-232 CH 'x' (Connected to GDU):
Input/output: "Connext FMT 1"
For ADS-B
GTX RS-232 CH (Connected to
Garmin Navigator) Input: "ADS-B+"
GTN/GNS RS-232 Configuration
Page:
RS-232 CH (Connected to GTX)
Output: "ADS-B+ Format 1"
NOTE: "x" = Connected Port #
GTX Installed with GTN
GTN Interfaced Equipment Page:
ADS-B IN Source Type: "GTX #1"
GTN/GNS RS-232 Configuration
Page:
RS-232 CH (Connected to GTX)
Output: "ADS-B+ Format 1"
190-02472-02
Revision 2