Related Manuals for matson MA20DC
Summary of Contents for matson MA20DC
- Page 1 MA20DC 20 AMP, DC to DC Battery Charger MA20DCS 20 AMP, DC to DC Battery Charger – With Solar Input Page 1 of 6 Rev: 1.3...
- Page 2 FEATURES Built tough for the Australian environment IP65 rated - protected against dust ingress and splash proof Electronically safe against user errors. The charger will not damage vehicle electronics Fully protected against short circuits and wrong connections to ensure safe charging operation ...
-
Page 3: Installation Instructions
Secure the charger with brackets and screws MA20DC and MA20DCS Chargers Output cables: Connect the Red (positive) ring to the Red (positive) terminal on the auxiliary battery Connect the Black (negative) ring to the Black (negative) terminal on the auxiliary battery... - Page 4 Repeat the selection process to change the chemistry. Remember the charger always defaults to its last setting Use a Matson Cable Extension kit to alter cable lengths. *NOTE- Once the main cranking battery falls below 12.3v, the charger stops operating and switches off.
-
Page 5: Schematic Diagrams
SCHEMATIC DIAGRAMS Page 5 of 6 Rev: 1.3... - Page 6 Warranty Matson warrants its products to be free of defects for reasonable consumer use for a period of 12 months. Matson will repair or replace the warranted product and it will return the repaired products under warranty to the consumer at Matson’s cost.