Advertisement
Quick Links
Advertisement
Related Manuals for matson MA4INONE
Summary of Contents for matson MA4INONE
- Page 1 MA4INONE 4 in 1 Battery Charger Instruction Manual...
- Page 2 1. AC Input Cord 2. LED Display Bar 3. “Battery Voltage Selection” button 4. Status Display 5. DC Output Cord 6. AC Fuse 7. Battery...
-
Page 3: User Guide
User Guide 4 in 1 Charger 1. Confirm that the correct input voltage is being used (200v – 240v). 2. Plug in the AC cord. DO NOT CONNECT THE CLAMPS TO THE BATTERY YET. 3. Press the “Battery Voltage Selection” button and select from the following options: a. -
Page 4: Led Troubleshooting
LED troubleshooting LEDs Description Solution The charger isn’t Connect the battery. If Flashes 2 connected to the battery there is no response, times or the DC fuse is broken check the fuse. The voltage of the Check the voltage of the Flashes 3 battery is too high or too battery and select the... -
Page 6: Specifications
Specifications Input voltage 200~240 Vac Input Frequency 50 / 60 Hz Current (Without Load) < 0.1A Maximum Input Current < 15 A (under) Maximum Efficiency in > 80% (above) Max. Power Output Voltage Maximum Amperage Maximum Output 450W 900W 1000W 900W Charging Power Voltage Sensor Start-up... - Page 7 Warning 1. This product is designed to charge batteries only. It cannot be used as a power supply. 2. This charger is designed to work with the following batteries: a. Lead Acid Cell b. NiMH Cell c. Enclosed Cell 3. Do not use batteries with a different voltage then that of the charger.
-
Page 8: Warranty
Warranty Products developed and sold by Tridon Australia Pty Ltd come with a guarantee for the reasonable life of the product, for the purpose it is commonly used. This is in addition to the rights of the consumer under the Australian Consumer Law. To be considered for warranty please take the product with proof of purchase to the store where you purchased the product or contact Tridon Australia The warranty is given by:...