Table of Contents
Advertisement
2
Drill pilot holes to a depth of 3 in. (7.6 cm) using a 3/8 in. (10 mm) diameter
masonry drill bit, then remove the template.
3
Insert the concrete wall anchors (
included) on page 7) into the pilot holes and use a hammer to make sure that the
anchors are flush with the concrete surface.
18
Need help? Call 1-800-620-2790 (U.S. and Canada)
3 in. (76 mm)
) (see Concrete Installation Kit CMK1 (not
C3
Hide quick links:
Advertisement
Table of Contents
