Attaching The Horizontal Brackets To A Tv With A Flat Back - RocketFish RF-HTLF23 Assembly Manual

STEP 3 - Option 1: Attaching the horizontal brackets to a
TV with a flat back
CAUTION: To avoid personal injury or property damage, do not use power tools.
1 Align the holes you noted on the horizontal brackets (04) with the screw holes
on the back of your TV.
2 Place the washers (
holes on the back of your TV, then insert the screws that you selected in
STEP 2 ( ) through the washers. Make sure that the brackets are level.
01
3 Tighten the screws until they are snug against the brackets. Do not over tighten.
You'll need
OR
OR
10 Need help? Call 1-800-620-2790 (U.S. and Canada)
) over the holes in the brackets that align with the screw
02
OR
OR
01 Screws (4)
02
04 Horizontal
Washer
(4)
Level
Phillips screwdriver
brackets (2)