Disconnecting/Connecting The Flexible Card Wires - Sony RM-PJ25 Service Manual

1-7. Disconnecting/Connecting the Flexible Card Wires

n
The flat cables, flexible card wires and boards are used to connect between the following boards. Life of
flexible card wire will be significantly shortened if it is folded. Be very careful not to fold the flat cables,
flexible card wires and boards.
Because the direction of the flat cables, flexible card wires and boards are different depending on the
shape of the connector, be careful when connecting the flat cables, flexible card wires and boards.
Disconnecting
1. Turn off the power.
2. Lift up the portion A in the direction of the arrow to unlock and pull out the flexible card wire.
Connecting
n
. Do not insert the coaxial cable with connector sideways.
. Check that there is no stain or dust on the contact surface of the coaxial cable with connector.
1. Lift up the portion A in the direction of the arrow and securely insert the flexible card wire into the
deep end of the connector.
2. Return the portion A to its original position and lock the connector.
n
When connecting the flexible card wire, check the connector shape, and great care should be taken for the
direction of the contact surface or isolation surface.
Connector: 1 Connector: 2
A
A
Contact surface
A
Isolation surface
1-25 (E)
VPL-HW40ES