Fig - TEFAL ClipsoMinut Perfect User Manual

Use
Pressure cooking
Opening
Switch the lid handle from a horizontal position to a vertical position
The lid turns.
Lift the lid.
In case of difficulties opening the lid, rinse the gasket under water and
replace it in the lid without drying it
each of the grooves on the lid
Closing
Ensure that the lid handle is in a vertical position.
Place the lid on the pot as indicated in
with the pot handles.
Lower the lid handle back from a vertical position to a horizontal position

Fig.

2.
It is normal that the lid turns on the pot. when the pressure cooker is closed
but not in operation. This effect disappears when it is pressurised.
If you are unable to close the lid:
Check the correct positioning of the gasket.
In case of difficulties closing the lid, rinse the gasket under water and replace
it in the lid without drying it
the grooves on the lid
Using for the first time
For models with a non-stick coating: wash and use cooking oil to lightly oil
the entire interior surface.
Depending on the model:
Place the pot handle * (L) and steam basket * (J) at the
bottom of the pot.
Clip the trivet * (K) to the steam basket * (J), then place it
at the bottom of the pot.
Fill the pot (O) with water up to 2/3 (MAX 2)
Close your pressure cooker.
Align the pictogram
the valve positioning mark (C)
6
Cooking with stew pot*
- fig 19
- fig 15.
- fig 19 and take care to insert it under each of
- fig 15.
for the operating valve (A) with
- Fig. 9.
and take care to insert it under
- Fig. 1 by lining up the plastic part
- fig 5.
Steam release
- Fig.
*depending on model
3.
-