Preparation; Installation - Topcon CL-300 User Manual

PREPARATION

INSTALLATION

WARNING
CAUTION
1
Remove the tape from the lens support.
2
Remove the tape from the marking ink cartridge.
3
Remove the port cover. Push the etched mark and move the cover to the arrow direction.
4
Plug in the power cable to the AC adapter.
5
Pass the cable through the cable clamp.
6
Connect the AC adapter plug to the AC adapter jack located on the rear panel of the main
body.
18
PREPARATION
To avoid fire/electric shocks, connect the power plug to a 3P
AC outlet (with ground) and secure grounding.
To avoid injury by falling, do not install the instrument on a
slope or in an unstable place.
Etched mark
IN OUT
AC adapter cable
Cable clamp