C: Errors And Malfunctions Recognized By The Computer - Fasep VIDEOTRONIC V644.G3 User Manual

Fasep 2000 srl
Videotronic V644.G3: User's Manual
C: Errors and Malfunctions recognized by the Computer
Errors may apply to some model only.
ERR 1: Shaft does not rotate
ERR 2: Rotation Direction is wrong
ERR 3: Rotation speed is not ready
ERR 4: Rotation speed is wrong (too low or too high)
ERR 5: Position Sensor or Position Disk failure
ERR 6: Safety Safety cover is open
ERR 7: Measuring cycle was interrupted
ERR 8: Calibration weight was not inserted.
ERR 9: Activation code not correct
ERR 10: Overflow in calculations
ERR 11: Serial number is wrong
ERR 12: Serial number not inserted
ERR 13: Reserved
ERR 14: Uncorrect password
ERR 15: E²prom error
ERR 16: Calibration memory error
ERR 17: Rod in uncorrect position
ERR 18: Excessive weight detected
ERR 19: Reserved
ERR 20: Reserved
ERR 21: Error in inputting data
ERR 22: Brake error
ERR 23: Substance change due to shakes
ERR 24: Reserved
ERR 25: Reserved
ERR 26: Reserved
ERR 27: Insufficient pressure
B-2
Rev. 1.0
27 november 2013