Step 14: LP Cylinder
Q LP Cylinder
is sold separately.
Use only with an OPD (Overfill
Protection
Device) equipped
LP Cylinder.
Fill and leak check before attaching
to grill and regulator.
•
Place LP Cylinder
into hole in bottom
shelf with tank collar opening
facing to the right as
shown.
0
Tighten thumbscrew
against tank bottom
to hold it securely in place.
Q Connect the cylinder
with the gas hose/regulator
as shown.
CAUTION
Failure to install tank correctly may allow gas hose
to be damaged in operation
Step 15:
Tighten
all
screws and nuts.
O CAUTION:
Use only the regulator
provided!
If a replacement
is necessary ncall our customer service
department,
1-888-577-9820.
Do NOT use replacement
parts that are not intended for this grill.
26 * 23671-46477279