Siemens SIMATIC NET CP 1515 Manual page 73

If the default SIMATIC NET IWL I/O Port has already been assigned to
another device, select an alternative I/O Port value from the range listed
below:
0200 0300
- -
0280 0380
- -
The default setting is 0400.
2. Verify that the alternative value is available (i.e. not listed in the Windows
NT Diagnostics window).
3. Write down the alternative I/O Port value and close the Windows NT
Diagnostics Program. Having finished these steps, you should now have
a note that identifies the following (alternative) values:
• IRQ value
• I/O Port Address
You can use these values to install the SIMATIC NET IWL Miniport Driver
as described later in this chapter.
Industrial Ethernet Wireless LAN CP 1515
C79000-G8976-C169-01
0400 0500
0440 0540
0480 0580
04C0 05C0
:LQGRZV 2SHUDWLQJ 6\VWHPV
0600
0640
0680
06C0
0700
0740
0780
07C0
73