Siemens SIMATIC NET CP 1515 Manual page 56

5DGLR &KDUDFWHULVWLFV
When installing PC Cards CP 1515 the channel configuration is managed as
follows:
• Wireless clients that operate in an RLM-based Wireless LAN
(Infrastructure Network) will automatically start operation at the channel
identified by the RLM. When roaming between different RLM devices
the station can dynamically switch to another channel if required.
• Wireless clients that operate in an "Peer-to-Peer" mode will default to
channel 10.
• AccessPoint RLM devices will use the factory-set default channel, unless
the LAN Administrator selected a different channel.
56 Industrial Ethernet Wireless LAN CP 1515
C79000-G8976-C169-01