Siemens SIMATIC NET CP 1515 Manual page 71

1R
• If , you can use the default. Write down IRQ 10 and proceed with
the next step.
<HV
• If
you will need to select another value for your PC Card .
3. See whether one of the following values is available (i.e. not listed in the
Windows NT Diagnostics window):
03, 04, 05, 07 , 09,
4. Select one non-listed value and write it down before you proceed with
the following topic.
9HULI\LQJ ,2 3RUW 6HWWLQJV
To display the values of I/O Ports that are already in use by other devices
installed on your computer, proceed as follows:
5HVRXUFHV
1. On the
the button
The default I/O Port value for PC Card is 0400.
1R
• If , you can use the default. Write down I/O Port 0400 and
proceed with the next step.
<HV
• If
address, i.e. you will need to select another value for your PC Card
CP 1515.
Industrial Ethernet Wireless LAN CP 1515
C79000-G8976-C169-01
, this means that another device is already using the IRQ, i.e.

, 11, 12, 15.
tab of the Windows NT Diagnostics program, click
Ã
,2 3RUW
. This will display the window pictured in
, this means that another device is already using this port
:LQGRZV 2SHUDWLQJ 6\VWHPV
Figure 17.
71