Siemens SIMATIC NET CP 1515 Manual page 63

% 6WDWLF ,3 $GGUHVVLQJ IRU 3HHUWR3HHU QHWZRUNV
In networks with Static IP addressing, the network administrator manually
assigns an IP address to each computer. Once a Static IP address is
assigned, a computer uses the same IP address every time it reboots and
logs on to the network, unless you manually change the IP address in the
1HWZRUN 3URSHUWLHV
easy to set up and do not require additional network management software.
A Peer-to-Peer network environment is best suited for
DGGUHVVLQJ
, because of its simplicity.
Peer-to-Peer networks are also not likely to have a DHCP server already set
up on the network.
Configure TCP/IP Settings for Static IP Addressing
127(
i
This IP configuration should only be applied to wireless networks
that do not have a DHCP server installed.
1. Right-click
3URSHUWLHV
2. Select
3URSHUWLHV
3. Select the
3URSHUWLHV
4. Click
Make sure the
Industrial Ethernet Wireless LAN CP 1515
C79000-G8976-C169-01
dialog box. Networks using Static IP addresses are
1HWZRUN 1HLJKERUKRRG
from the pop-up menu to display the
dialog box.
&RQILJXUDWLRQ
tab, and click
to display the
6SHFLI\ DQ ,3 DGGUHVV
on your desktop.
7&3,3 ,*DWH 3& &DUG
7&3,3 3URSHUWLHV
option is selected.
/(' $FWLYLW\
6WDWLF ,3
1HWZRUN
.
dialog box.
63