Advertisement
Available languages
Available languages
testoterm
testoterm
m
e r
o t
s t
t e
Flexible flue gas probes 0600.9430 / 0600.9440
Instructions for use
Probe p p ipe c c an b b e b b ent ( ), but not kinked ( ).
Do n n ot u u se f f orce
Technical data
Measurement range:
Outer diameter of probe pipe:
Probe pipe length:
Max. immersion depth:
Minimum bending diameter ( ):
Cleaning the flue gas probe
Unscrew probe pipe at the screw connection and remo-
ve pipe.
Place probe pipe in hot water and move the probe pipe
around. Blow air through pipe or clean with a round
brush (e.g. made of brass).
Change thermocouple
Pull out the bending protection spring from the guide at
the back outlet with a counter-clockwise movement and
pull off the tubing.
Remove the thermocouple from t t he p p lastic c c lip using a
screwdriver.
Do n n ot p p ull o o n t t he t t hermocouple c c able!
Pull bending protection spring over the thermocouple
and remove the thermocouple cable from the slit hose.
Apply lubricant e.g. grease to the O ring before installing
a thermocouple in order to avoid damage.
When inserting the new thermocouple press on the pla-
stic clip but not on the thermocouple cable.
Up to 500 °C
10 mm
330 mm
280 mm
140 mm
Advertisement
