Ventilation Product User Manual - Interlinked Operation With Direct Expansion Ventilation - LG PQRCVSL0 Owners & Installation Manual

Owner's Instructions
Manual Conversion - Pressing 'Ventilation' button in ventilation mode will manually convert
It is a function to cool and refresh the indoor air using general ventilation product..
64 New Wide Wired Remote Controller
Ventilation single operation
Press button on the remote
1
controller.
2 Pressing button will change
the ventilation mode.
Ventilation Remote Controller
Contents
mode
Display
Heat
Circulate indoor air without loss of heat
exchange
Directly circulate indoor air without going
Normal
through heat exchanger
Circulate indoor air with automatically
Automatic
comparing indoor and outdoor air
In the case of heat exchange mode, the display is
shown as below.
→ → → → → → →
Pressing button will change
3
the strength of the wind
- Pressing the button can select
from 'weak → strong → very strong'.
- If CO2 sensor is installed, it can select from
'weak → strong → very strong → automatic'.

Ventilation Product User Manual - Interlinked Operation with Direct Expansion Ventilation

It can only be used when the air conditioner is interlinked with direct expansion ventilation product.
Owner's Instructions
Interlinked Operation with Direct
Expansion Ventilation
1 Press button on the remote
controller.
- It is used only when air conditioner
and the ventilation product are
interlinked. ('Interlinked operation' displayed
on the remote controller display)
2 Pressing button in ventilation
mode starts ventilation.
Pressing button in ventilation
3
mode will change the ventilation
mode.
- Every time the button is pressed,
it changes from 'Heat exchange → normal →
automatic'.
❈ The display on the remote controller
displays only when it is in ventilation mode,
and when it converts to air conditioner
mode, it displays the desired temperature.
Pressing button in ventilation
4
mode changes the strength of wind.
- Pressing the button can select from
'weak → strong → very strong'.
Changing back to air conditioner mode
5
1) Automatic Conversion : when no button is
pressed for 15 seconds or longer, it
automatically converts back to air
conditioner mode.
2) Manual Conversion : Pressing button
in ventilation mode will manually convert.
Owner's & Installation Manual 65