Installer Setting - Remote Controller Master/Slave Setup; Installer Setting - Override Master/Slave Setting - LG PQRCVSL0 Owners & Installation Manual

Installation Instructions

Installer Setting - Remote Controller Master/Slave Setup

It is a function for settings in group control, or 2-remote controller control.
Remote controller
Indoor unit operates based on master remote controller at group control.
Master
(Master is set when delivered from the warehouse.)
Setup all remote controllers except one master remote controller to slave at
Slave
group control
C
Refer to the 'group control' part for details
•
When controlling in groups, basic operation settings, airflow strength weak/medium/strong,
lock setting of the remote controller, time settings, and other functions may be restricted.
18 New Wide Wired Remote Controller
Pressing and holding the button
1
for 3 seconds enters the remote
controller setup mode. If it is not held
for 3 seconds, it enters the user
setup mode.
If pressing button repeatedly, it moves to
2
master/slave selection menu as pictured
below.
3 Select Master/ Slave by pressing
button.
(00: Slave, 01: Master)
Function Code Master/Slave value
Press button to save.
4
5
Pressing the button will exit the settings
mode. If is not pressed, the remote
controller will automatically exit setup mode
after 25 seconds with no input. If the set
button is not pressed, the changes will not
take effect.
Function

Installer Setting - Override Master/Slave Setting

Override master/slave selection function to prevent indoor units operate as cooling and heating mode
at same time.
Override slave set indoor units are operated flow master indoor unit's mode.
C
Override master/slave selection function is possible to use only when it is connected to the
succeeding models of Multi-V 7 series.
•
If it is set as Override Slave, icon
is displayed on LCD Display Window. (See Figure 1)
Installation Instructions
Pressing and holding the button
1
for 3 seconds enters the remote
controller setup mode. If it is not held
for 3 seconds, it enters the user setup
mode.
If pressing button repeatedly, it moves to
2
override master/slave selection menu as
pictured below.
3 Select Master/ Slave by pressing
button.
(00: Slave, 01 : Master)
Function Code Master/Slave
4 Press button to save.
5 Pressing the button will exit the settings
mode. If is not pressed, the remote
controller will automatically exit setup mode
after 25 seconds with no input. If the set
button is not pressed, the changes will not
take effect.
Figure 1.
Owner's & Installation Manual 19