Function Setting - Child Lock; Function Setting - Robot Cleaning Automatic Setup - LG PQRCVSL0 Owners & Installation Manual

Owner's Instructions

Function setting - Child Lock

This feature locks the keypad to prevent any unwanted changes to the settings.
42 New Wide Wired Remote Controller
1
Press button repeatedly until
the is flashing.
2
If moving to 'setup' icon area by
using button, 'setup' icon
blinks, and child lock function is
setup if pressing button at
that time.
3
When cancelling lock function, if moving
to 'cancel' icon by pressing button
and then, pressing button, child lock
function is cancelled.
4
Pressing the button will exit the
settings mode. If is not pressed, the
remote controller will automatically exit
setup mode after 25 seconds with no
input. If the set button is not pressed, the
changes will not take effect.

Function setting - Robot Cleaning Automatic Setup

Robot cleaning function is the function of cleaner attached to the product to automatically clean filter
when using air-conditioner for the specific period of time.
Set manual or automatic mode of smart cleaning.
• Robot cleaning is an additional function and it might not be available on all types of indoor unit
Owner's Instructions
1
Press button repeatedly until
the is flashing.
2
When flashes, press
button to set/clear this function.
Set state : Enable Auto Smart Clean function
Clear state : Disable Auto Smart Clean function
3
When returning to manual robot cleaning,
manual function is cancelled if moving to
'manual' icon by pressing Right/Left button
and then, pressing button.
4
Pressing the button will exit the
settings mode. If is not
pressed, the remote controller will
automatically exit setup mode
after 25 seconds with no input. If
the set button is not pressed, the
changes will not take effect.
Owner's & Installation Manual 43