Removing The Door - IKEA Framtid CG7 Instructions For Use Manual

Removing the door

Important: it is advisable to use protective gloves for the
following operations. To prevent possible injury and to
avoid damaging the oven door and hinges, carefully follow
these instructions.
The oven door can be removed as follows:
1. for this purpose the hinges A are provided with movable U
bolts B which hook onto the sectors of hinges C when they
door is completely open, locking it;
2. lift the door outwards, carrying out the two movements
shown in the figure;
3. hold the sides of the door near the hinges;
4. to refit the door, insert the hinges in their special seats.
Do not forget to remove the movable U bolts B before closing
the door.
Pay attention to the oven door hinges: danger of injuring
hands.
Changing the rear oven lamp:
1. Electrically disconnect the oven.
2. After the oven has cooled down, unscrew (anticlockwise) the
lamp cover.
3. Change the lamp (see note).
4. Refit the lamp cover.
5. Electrically reconnect the oven.
NB: Only use 25 W 230 V lamps, type E-14, T300°C,
available from our After-Sales Service.
Important: Do not use the oven without refitting the lamp
cover.
28