Table of Contents
Advertisement
Changing the M166 Settings
Set the settings according to the screen capture above.
If you want to start from the settings in the Template file ( .166) that you have
4.
created in
chapter 2 Setting up a
have this file anymore, start with the default settings in the DECT Handset
Configurator. Please note that it is not possible to read out the settings from the
M166.
5.
Go through the settings. Use the explanation in
Make the changes in the settings according to the customers' requirements.
6.
Enter the name and the number of the handset. The number is the extension number
to which the configuration settings are sent.
7.
After you have made the changes, send the configuration to the 166 via the menu
item: Messaging Send, or the small "Send" icon in the tools bar.
© NEC Nederland B.V. 2015
Template, read in this Template file. If you do not
chapter 2 Setting up a
Page 34
Template.
M166 CE Manual
Advertisement
Table of Contents
