Buttons - NEC M166C Customer Engineer Manual

Buttons and LED Indications
5.2

Buttons

There are three buttons:

Left side:
To switch off:
Keep the On/Off button depressed for at least the number of seconds that you have
specified in the DECT Handset Configurator or until you hear the Switch off beep.
To Switch on:
Press the On/Off button

Front Button
Button used for:
- Activating an alarm (depending on settings in the DECT Handset Configurator,
the alarm will be a message or a voice call to a specified destination.
- Terminating a voice call (Hang-up voice call). Keep the button depressed for at
least 2 seconds
- Answering an incoming voice call.

Top Button
Button used for:
- Activating an alarm (depending on settings in the DECT Handset Configurator,
the alarm will be a message or a voice call to a specified destination.
© NEC Nederland B.V. 2015
On /off button
Page 38 M166 CE Manual