NEC MH110 - FUNCTION KEYS Manual

NEC
Note: All Softkeys remain the same as PBX setting.
WIRELESS HANDSET MH110
Function key Emulates fixed
display: operation keys:
1 Hold Hold
2 Transfer Transfer
3 Conf Conference
4 Recall Recall
5 Redial Redial
7 Directory Directory
8 Message Message
9 Mute MIC
Line key display Emulates
programmable line
keys
1 Prime line Extension
number/Name
2 Program as Feature name (CB,
required S&R etc)
3 Program as Feature name (CB,
required S&R etc)
4 Program as Feature name (CB,
required S&R etc)
Standby
menu item
Key
sequence Lock Keys
Ring Options
FCN + 1
FCN + 2
FCN + 3
FCN + 4
FCN + 5
FCN + 7
FCN + 8
FCN + 9
Key sequence
LINE + 1
LINE + 2
LINE + 3
LINE + 4
Phone
Options
System Info
Identification
NEC options
nd rd th
2 Level 3 Level 4 Level
Telephone Ring Off
Ring Cadence *PBX
Continuous
Short Pulse
Long Pulse
Ring Tone *Tone 1
Tone 2
Tone 3
Tone 4
Tone 5
Ring Bars
Volume
Vibrate *Off
Cadence PBX
Continuous
Short Pulse
Long Pulse
Ring *No Delay
Delay** 5 Second Delay
10 Second Delay
Auxiliary
Ring 1
Auxiliary
Ring 2
Noise *Normal
Mode High
Severe
Key *Enable Tones
Tones Disable Tones
Warning *Enable warnings
Tones Disable warnings
Display Contrast %
Contrast
Keypad *Disable
Autolock 5 seconds
10 seconds
20 seconds
Phone IP Displays current IP address
Addr assigned the handset and current
Alias IP address assigned to the
handset from the SVP server.
Server IP Displays the IP address of the SVP
Addr server and the spectralink OAI
server.
Firmware Displays MAC address and version
Version of handset
Enter in name to identify your handset.
NEC PBX IP Displays IP address of the
PBX.
Displays port information.