ICP DAS USA LRA-900-E Quick Start Manual page 2

1
Connecting the Power and Host PC
1. Make sure your PC has workable network settings.
Disable or well configure your Windows firewall and Anti-Virus firewall first,
else the "Search Servers"on Chapter 4 may not work. (Please contact with
your system Administrator)
2. Connect both the LRA-900-E and your PC to the same sub network or the
same Ethernet switch.
3. Check that the Init/Run switch is in the "Run" position and set the
"Device ID" switch to necessary position.
4. Supply power (+10~+30 V
Technical support：service@icpdas.com
) to the LRA-900-E.
DC
P2