Tig - Sherman digitec DIGITIG 200AC / DC MULTIPRO User Manual

7.2 TIG

Current terminal holder should be connected to the negative pole (1), plug control handle carefully screwed into the socket (3) and the gas
connection socket connectors (2). Gas conduit from the regulator, lead and attach to the gas nozzle (9) located on the rear wall of the housing. The
positive pole of the source (5) connected to the work piece by means of a wire with a clamp. Plug the device into a power outlet 230V 50Hz.
IGBT Inverter Technology IGBT Inverter Technology
DIGITIG 200 ACDC MULTIPRO
Current
Slope Up
ISTART
PULSE Duty
PULSE Frenquecy
Y
H. F H. F
2T LIFT
4T MMA
GAS
IGBT Inverter Technology IGBT Inverter Technology
DIGITIG 200 ACDC MULTIPRO
Current Arc Force
Slope Up Down Slope
ISTART i = the
Base Current
PULSE Duty AC Balance AC
PULSE Frenquecy
frenquency
Y
OC OT USER
H. F H. F ASH%
2T LIFT AC
4T MMA DC
MEMORY MEMORY
GAS
Arc Force
Down Slope
i = the
Base Current
AC Balance AC
frenquency
OC OT USER
ASH%
AC
DC
MEMORY MEMORY
TECWELD Peter Polak Sherman
41-943 Piekary Sl. Ul. Emerald
21/3/6
type: ACDC TIG 200P Model: DIGITIG 200ACDC MULTIPRO ACDC TIG 200P Model: DIGITIG 200ACDC MULTIPRO ACDC TIG 200P Model: DIGITIG 200ACDC MULTIPRO
EN 60974-1
MMA: 20A / 180A-20.4V / 27.2V
TIG MMA
X 60% 100% 60% 100%
U = 67V And 2 18V 154A 180A 138A
U2 200A 16.1V 27.2V 25.5V
And TIG = 19.3 And TIG = 13A
1 ~ 50Hz U = 230V
And MMA = 19.3 MMA I = 13A
IP 23 S / N: TIG 5A / 10.2V-200A / 18V
TECWELD Peter Polak Sherman
41-943 Piekary Sl. Ul. Emerald
21/3/6
type: ACDC TIG 200P Model: DIGITIG 200ACDC MULTIPRO ACDC TIG 200P Model: DIGITIG 200ACDC MULTIPRO ACDC TIG 200P Model: DIGITIG 200ACDC MULTIPRO
EN 60974-1
MMA: 20A / 180A-20.4V / 27.2V
TIG MMA
60% 100% 60% 100%
X
And 2 200A 154A 180A 138A
U = 67V
U2 18V 16.1V 27.2V 25.5V
= 19.3 = 13A
And TIG And TIG
1 ~ 50Hz U = 230V
And MMA = 19.3 MMA I = 13A
IP 23 S / N: TIG 5A / 10.2V-200A / 18V
6
Reducer
Gas
cylinder