Servicing; Annual Servicing; Changing Components - Benchmark PulsaCoil 2000 Series Design, Installation And Servicing Instructions

3.0 SERVICING

3.1 ANNUAL SERVICING

No annual servicing of the PulsaCoil 2000
is necessary.
However, if required, the operation of the
controls and a hot water performance test
can be carried out to prove the appliance
is working satisfactorily and within its
specification.
3.2 CHANGING
COMPONENTS
Free of charge replacements for any faulty
components are available from Gledhill
during the in-warranty period on return of
the faulty part (normally 12 months).
After this, spares can be obtained direct
from Gledhill using the 'Speed Spares'
service, or through any of the larger
plumbers merchants/specialist heating
spares suppliers.
Help and advice is also available from the
Technical Helpline on 01253 474401.
However, all components are readily
accessible and can be changed quickly and
easily by the installer using common plumbing
practice.
If it is necessary to replace the pump fitted to
the appliance the pump head (motor pack)
only should be removed as recommended
by Grundfos. Assuming it is within warranty
this will be accepted by a merchant as
being covered by the Grundfos national
service exchange agreement, as long as
it is a complete pump i.e. alleged faulty
motor pack and new base is left with the
merchant. It is important when a pump
has been replaced to ensure that any air
is adequately vented and the pump is set
on speed 3.
Page 20