Benchmark PulsaCoil 2000 Series Design, Installation And Servicing Instructions page 27

A mains pressure hot water supply system incorporating an off peak electric thermal store

Table of Contents

��

APPENDIX B

The size of the distribution pipes supplying

the manifold should be calculated using

the method set out in BS 6700. A typical

diagrammatic arrangement of a system using

Manifold Type 1 is shown below. This is only

meant to show the principles involved and the

actual connection of fittings to the manifold

will need to suit the arrangements shown on

page 35.

Note 1 - If it is proposed to fit chemical water

treatment such as a water softener this should

be fitted in this location and the cold water

branch in the sink should be branched off the

cold water main prior to the treatment device

instead of the cold water manifold.

Any other isolating/control valves and

backflow protection devices should be

provided as necessary to comply with the

Water Regulations.

��

Page 27

��

Table of Contents

Show Quick Links

Table of Contents

Pulsacoil 125 Pulsacoil 185 Pulsacoil 215 Pulsacoil 235 Pulsacoil 145