Snom 715 Manual page 14

forwarded after the specified time has elapsed? The caller receives a call waiting signal and is then
forwarded to the defined destination.
If unavailable (not registered)
The option functions only if the end device is not registered to the telephone system:
When the Internet connection fails or there is no LAN connection.
and
If "call forwarding ...if unavailable" is programmed for a direct extension (e.g. extension 123 -
John Doe) and a caller calls the direct dial number for the extension directly, call forwarding
applies. If the extension is a member of a queue or a group and the queue or group receives a
call, call forwarding for the individual extension no longer applies! In general, the destination
should always be an available destination number. I.e., make sure that no voicemail or
announcement comes on.
Call forwarding codes
Call forwardings can alternatively be activated through * codes:
*10
*11 + destination Permanent call forwarding to telephone number
**11
*12 + destination
**12
*13 + destination If busy, forward to telephone number
**13
*14 + destination Call forwarding if unavailable
**14
When disconnecting the connection between the end device and the telephone system, it
can take up to 60 seconds for the call forwarding to work. Once the end device is
reconnected to the telephone system, it can take up to 60 seconds for it to register.
The snom 710/D710 does not have a menu key. Access the menu by pressing the the
second function key. Refine your call forwarding options via nControl.
Activation of the call forwarding profile
Cancel permanent call forwarding
If no answer after a specific time, delayed call forward
to telephone number
Cancel delayed call forwarding
Cancel call forwarding if busy
Cancel call forwarding if unavailable
14