Table of Contents
Advertisement
received product.
3.2.1 Unpacking the MicroDC
Upon receiving your MicroDC, please examine the packaging
for any signs of mishandling or damage. If any damage is
noted, shoot some pictures or a short video and then please
notify Customer Service at Signamax and your carrier
as well. Do not attempt to continue the unpacking unless
otherwise advised. Remember that the Limited Warranty is
not valid whenever a transportation mishandling has
damaged the MicroDC.
The MicroDC is standing on a wooden pallet. All the
way round there are lots of thick cartons used for protection
of the cabinet against possible damage to the surface color.
Overall these carton vertical lines there is nylon or bubble
nylon used for protection against dust, insects or any other
small similar intrusions.
Step 1:
Remove all wooden pcs or wooden box (whenever
it is present in the packaging contents). You might
need to use a Phillips screwdriver and a hammer.
www.signamax.com
Micro Data Center Technical Manual 9
Advertisement
Table of Contents
