Maintenance; Cooling Device - SignaMax MicroDC Technical Manual

Data centers for the edge
Table of Contents

Advertisement

The PDU comes either in 19 inches version (horizontal
placement) or 0U version (vertical placement). This information
is usually pre-defined at the ordering procedure.
Note: Please refer to the respective user manual of the PDU
for any more detailed information on how to use or setup the
PDU.

4 Maintenance

One of the biggest advantages of the MicroDC is the very low
maintenance cost needed in order the system to operate and
function as brand new.

4.1 Cooling device

Caution! Before embarking on any maintenance work,
switch current off of the cooling unit.
The cooling unit is a low maintenance type; so no filter change
is required. The main job that regularly needed to be done is
to blow the internal components with compressed dry air at
a maximum pressure of 4 bars; the following also shall be
checked regularly:
Job
Check the external air to air heat exchanger
and clean if necessary
Check effectiveness of the condensate dis-
charge hose to check whether it has been
blocked or not
Check the fans for any overheating signs or
paranormal vibration
www.signamax.com
Frequency
Every 3 months
Every 3 months
Every 6 months
Micro Data Center Technical Manual 17

Advertisement

Table of Contents
loading

Table of Contents