Table of Contents
Advertisement
Step 4:
At all corners of the MicroDC there is a support
mechanism in order to avoid the MicroDC from
slipping while the transportation. You might need
to use a Phillips screwdriver. Locate the wooden
ramp standing next to the MicroDC cabinet. You
will need this ramp in the next step, to unload the
MicroDC from the pallet.
Step 5:
Attach the ramp towards the front door of the
MicroDC as closest as possible. Release the
brakes on the wheels (if available). Then grab the
MicroDC gently and carefully slide it down so it
can slowly move to the floor. After the MicroDC
has left the wooden pallet is ready to be placed at
its final position.
Note: Known the weight and size of the MicroDC, it is possible
that the MicroDC may tip over while moving. The MicroDC
must be removed from the shipping crate using a minimum
of 2 people. The MicroDC may not be tipped more than 10
degrees, either from a level surface or rolling down an incline
(ramp).
www.signamax.com
Micro Data Center Technical Manual 11
Advertisement
Table of Contents
