Secondary Equipment - SignaMax MicroDC Technical Manual

The Air-Condition itself has a built in heat exchanger
for the proper work of its cooling cycle. Whenever
the compressor is running on, it exchanges heat
in between the air of the room and itself. Thus the
installer should choose the proper placement for this
MicroDC i.e. close to an open window or in a well-
ventilated position.
Please refer to the respective user manual of the cooling unit
for any more detailed information on how to operate and
setup the cooling unit.

3.4 Secondary Equipment

3.4.1 PDU
Only PDUs certified for Canada can be used unless approved
by the Authority having Jurisdiction in the end use
application.
S i g n a m a x offers different models of CSA Certified
PDU's if required as part of Micro DC Solution. They are
available in single-phase but also three-phase power input
options. The units may be used in 120V, 208-240V or
230V applications, with almost every type of connectors
including NEMA or IEC type; they are available in basic
type, metered and with or without remote monitoring and
individual receptacle control.
The PDU (whenever available) comes preinstalled into the
MicroDC. Usually it is fed by the UPS system and allows
all equipment to be directly connected to it.
You might need to use some specific adaptor if the
equipment power cable does not meet the PDU outlet types.
www.signamax.com
Micro Data Center Technical Manual 16