MÄRKUS
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
1. Remove the seven screws (M2.5x6) that secure the base cover to the palm-rest and keyboard assembly.
2. Loosen the two captive screws on the base cover.
3. Using a plastic scribe, pry the base cover starting from notches located at the top-left corner of the computer base.
4. Lift the base cover off the palm-rest and keyboard assembly.
Tagakaane eemaldamine
computer. After working inside your computer, follow the instructions in
After
Tagakaane eemaldamine
6
17