Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Machfu i-ALERT Series
Summary of Contents for Machfu i-ALERT Series
- Page 1 i-ALERT® Gateway Installation Manual August 8, 2019 Revision 2.0...
- Page 2 i-ALERT® Gateway Installation Guide Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.
-
Page 3: Table Of Contents
i-ALERT® Gateway Installation Guide Table of Contents Overview .............................. 4 System View ............................5 Gateway Interface ......................... 5 Powering the Gateway ........................6 2.2.1 AC Powered Gateway......................6 2.2.2 9-60 VDC Powered Gateway ....................6 2.2.3 Conduit Fittings ........................7 Mounting Options ......................... - Page 4 i-ALERT® Gateway Installation Guide REVISION HISTORY Revision Description Date Draft release 4/4/2019 Draft revision 5/10/2019 Draft revision 6/30/2019 Final Revision 8/8/2019 3/13...
-
Page 5: Overview
i-ALERT® Gateway Installation Guide 1 Overview The i-ALERT Gateway is an Industrial Internet-of-Things (IIoT) device. It is deployed on the ITT ® Pro Services cloud, enabling you to securely collect, analyze, and act on data from i-ALERT2 ® ® sensors. The gateway is designed to be plug and play and requires no setup other than physically mounting the unit and applying power. -
Page 6: System View
i-ALERT® Gateway Installation Guide 2 System View 2.1 Gateway Interface The gateway interface points are shown in Figure 1: 1. Plug 1 is an expansion plug allowing an additional gland or conduit fitting to be added 2. Plug 2 is the gland for the power input cable 3. -
Page 7: Powering The Gateway
i-ALERT® Gateway Installation Guide 2.2 Powering the Gateway 2.2.1 AC Powered Gateway The i-ALERT® AC Gateway is by default shipped with a 110 VAC/240 VAC cord separately. This gives the user the option to hardwire the Gateway or to use the provided 110 VAC/240 VAC cord. When using the standard plug-in cord, the rating is no longer classified as C1D2. -
Page 8: Conduit Fittings
i-ALERT® Gateway Installation Guide 2.2.3 Conduit Fittings The power cord gland may be replaced by a standard 20mm or ½” conduit fitting, See 4. WARNING: If the i-ALERT2 ® Gateway is rewired using conduit, it must be installed by knowledgeable, skilled personnel familiar with local and/or international electrical codes and regulations. -
Page 9: Mounting Options
i-ALERT® Gateway Installation Guide 2.3 Mounting Options The gateway is shipped with mounting ears and has an optional poll mounting bracket 2.3.1 Wall Mounting The mounting ears are shown in 5. Each mounting ear is attached with two flat head screws (item#5). Figure 6 provides information on the mounting hole pattern. -
Page 10: Pole Mounting
i-ALERT® Gateway Installation Guide 2.3.2 Pole Mounting The i-ALERT® Gateway can be modified to be mounted with an optional pole mount bracket kit as shown in Figure . The pole mount kit can be used with poles of diameter of 2 inches to 12 inches. To mount the bracket to the gateway, remove the mounting ears by removing the screws (4 X item #5, Figure ). -
Page 11: I-Alert Gateway Quick Start Guide
i-ALERT® Gateway Installation Guide 3 i-ALERT Gateway Quick Start Guide The following guide provides the basic instructions to install your i-ALERT Gateway. Please read the full i-ALERT Gateway Installation and Operation Manual at www.i-alert.com/xxxxx prior to installing your i- ALERT Gateway. Select Location Select a location central to the nearest cluster of i-ALERT enabled machines. -
Page 12: Troubleshooting
i-ALERT® Gateway Installation Guide 3.1 Troubleshooting I don’t have an i-ALERT Ai Platform PRO Account To view your i-ALERT enabled sensors online via the i-ALERT Gateway you must have a PRO account. If you do not have a PRO account contact us at sales@i-alert.ai or log into your i-ALERT account at www.i-alert.ai... -
Page 13: Safety And Regulatory Information
For additional best practices information, go to www.machfu.com/regulatory_compliance. WARNING: If the i-ALERT2® Gateway is rewired using conduit, it must be installed by knowledgeable, skilled personnel familiar with local and/or international electrical codes and regulations. - Page 14 i-ALERT® Gateway Installation Guide equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his/her own expense. FCC Radiation Exposure Statement This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules.