Table of Contents
Advertisement
2.3
Installing the Hub
2.3.1
Tools You Will Need
You will need a #2 Phillips screwdriver.
2.3.2
Preparing the Cabinet
Follow the instruction in your system or expansion cabinet documentation. If
necessary, be sure to:
Extend the antitilt bar
Remove or open the top front panel
Remove or open the rear panel
2.3.3
Installing the Mounting Tray in the Cabinet
1. Select the correct mounting holes in the cabinet to use for the tray.
Refer to the online Rackmount Placement Matrix for mounting hole information.
2-2
Sun StorEdge FC-100 Hub Installation and Service Manual • September 1998
Advertisement
Table of Contents
Need help?
Do you have a question about the STOREDGE FC-100 and is the answer not in the manual?