Figure 32: Bios Advanced Menu - Serial Port Console Redirection - Out-Of-Band Mgmt Port Console Redirection Settings - Quanmax RAK-120S User Manual

Figure 32: BIOS Advanced Menu - Serial Port Console Redirection - Out-of-Band Mgmt Port Console Redirection
Settings*
Main
Out-of-Band Mgmt Port
Terminal Type
Bits per second
Flow Control
Data Bits
Parity
Stop Bits
* This submenu appears only when enabling console redirection of Out-of-Band Management Port in the previous
higher menu.
Feature
Out-of-Band Mgmt
Port
Terminal Type
Bits per second
Flow Control
BIOS SETUP UTILITY
Advanced Power
[COM1]
[VT-UTF8]
[115200]
[None]
8
None
1
Version 2.19.1266. Copyright (C) 2019, American Megatrends, Inc.
Option
[COM1], [COM2]
[VT100], [VT100+],
[VT-UTF8], [ANSI]
[9600], [19200],
[57600], [115200]
[None], [Hardware
RTS/CTS], [Software
Xon/Xoff]
Boot
Description
Microsoft Windows Emergency Management Services (EMS)
allows for remote management of a Windows Server OS
through a serial port.
VT-UTF8 is the preferred terminal type for out-of-band
management. The next best choice is VT100+ and then VT100.
See above, in Console Redirection Settings
Select serial port transmission speed. The speed must be
matched on the other side. Long or noisy lines may require
lower speeds.
Flow control can prevent data loss from buffer overflow. When
sending data, if the receiving buffers are full, a 'stop' signal can
be sent to stop the data flow. Once the buffers are empty, a
'start' signal can be sent to re-start the flow.
RAK-120S - User Guide, Rev. 1.0
Security Save & Exit
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
// 67