Figure 24: Bios Advanced Menu - Network Stack Configuration - Quanmax RAK-120S User Manual

Figure 24: BIOS Advanced Menu - Network Stack Configuration

Main
Network Stack Configuration
LAN Boot I210-AT-1
LAN Boot I210-AT-2
LAN Boot X553 1GbE-1
LAN Boot X553 1GbE-2
LAN Boot X553 1GbE-3
LAN Boot X553 1GbE-4
Ipv4 PXE Support
Ipv6 PXE Support
Feature
LAN Boot I210-AT-1
LAN Boot I210-AT-2
LAN Boot X553 1GbE-1
LAN Boot X553 1GbE-
2
LAN Boot X553 1GbE-
3
LAN Boot X553 1GbE-
4
Ipv4 PXE Support
Ipv6 PXE Support
BIOS SETUP UTILITY
Advanced Power
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Enabled]
[Disabled]
Version 2.19.1266. Copyright (C) 2019, American Megatrends, Inc.
Option
[Disabled], [Load PXE]
[Disabled], [Load PXE]
[Disabled], [Load PXE]
[Disabled], [Load PXE]
[Disabled], [Load PXE]
[Disabled], [Load PXE]
[Disabled], [Load PXE]
[Disabled], [Load PXE]
Boot
Description
Select whether to enable or disable load onboard PXE (Preboot
Execution Environment) or uEFI-SNP (Simple Network Protocol).
Intel I210-AT-1
Select whether to enable or disable load onboard PXE (Preboot
Execution Environment) or uEFI-SNP (Simple Network Protocol).
Intel I210-AT-2
Select whether to enable or disable load onboard PXE (Preboot
Execution Environment) or uEFI-SNP (Simple Network Protocol).
Intel X553 NIC with Marvell 88E1543 Port 1.
Select whether to enable or disable load onboard PXE (Preboot
Execution Environment) or uEFI-SNP (Simple Network Protocol).
Intel X553 NIC with Marvell 88E1543 Port 2.
Select whether to enable or disable load onboard PXE (Preboot
Execution Environment) or uEFI-SNP (Simple Network Protocol).
Intel X553 NIC with Marvell 88E1543 Port 3.
Select whether to enable or disable load onboard PXE (Preboot
Execution Environment) or uEFI-SNP (Simple Network Protocol).
Intel X553 NIC with Marvell 88E1543 Port 4.
Select whether to enable or disable Ipv4 PXE Boot Support. If
disabled, IPv4 PXE boot support will not be available.
Select whether to enable or disable Ipv6 PXE Boot Support. If
disabled, IPv6 PXE boot support will not be available.
RAK-120S - User Guide, Rev. 1.0
Security Save & Exit
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
// 58