Figure 10: Mounting The Chassis (Inner) Slide Rail To The Server Chassis; Figure 11: Attaching The Cabinet (Outer) Slide Rail To The Rack Rail - Quanmax RAK-120S User Manual

Pull chassis (inner) slide rail out
2. Mount the chassis (inner) slide rail to the server chassis through the two standoffs located on the chassis and a
supplied M4 screw.

Figure 10: Mounting the chassis (inner) slide rail to the server chassis

3. Release the safety lock to unlock position before mounting the cabinet slide rail. Insert the stag into the upper and
lower square holes on EIA rack rail from the back of rack rail. Push the safety lock to secure the cabinet slide rail.

Figure 11: Attaching the cabinet (outer) slide rail to the rack rail

Press the trigger dowm to release
Chassis (inner) slide rail
Cabnet (outer) slide rail
RAK-120S - User Guide, Rev. 1.0
// 34