2.3 Watching Network Activity
Make sure that you are connected to an active network.
You can watch network activity or incoming network packets by typing
:
watch-net-all
ok watch-net-all
/iommu@f,e0000000/sbus@f,e0001000/SUNW,hme@3,8c00000
Internal loopback test -- succeeded.
Transceiver check -- Using Onboard Transceiver - Link Up.
passed
Using Onboard Transceiver - Link Up.
Looking for Ethernet Packets.
'.' is a Good Packet. 'X' is a Bad Packet.
Type any key to stop.
...........
Note – The network speed is the same as the speed of the hub to which your
system is connected. See Chapter 3, Section 3.6, "Post-Installation Procedures
(Optional)" for more detailed information on speed selection.
Where to Proceed
•
See Chapter 3, "Installing SunSwift SBus Adapter Software On Solaris 2.4
and 2.5 Systems."
Installing the Adapter
2
2-3