Table C-1 Files And Directories On The Cd-Rom - Sun Microsystems Ethernet PCI-X Adapter Installation And User Manual

If your system is not running Volume Manager, mount the CD-ROM as follows:
# mkdir /cdrom
# mkdir /cdrom/cdrom0
# mount -F hsfs -o ro /dev/dsk/c0t6d0s2 /cdrom/cdrom0
You will see the following files and directories in the
/cdrom/sun_10-gigabit_ethernet_driver directory or the
/cdrom/cdrom0 directory, depending on how you mounted the CD-ROM.
Files and Directories on the CD-ROM
TABLE C-1
File or Directory
Copyright
FR_Copyright
10_GigabitEthernet/Linux/SRPM/
10_GigabitEthernet/Solaris_OS-VER
/ARCH/Packages/
Note – If you intend to use VLAN, you must install VLAN packages when you
install the software packages.
3. To use the optional VLAN Utility with the 10-Gigabit Ethernet driver on the
Solaris 9 Operating System, verify the proper patch revision using the following
command:
# showrev -p | grep 114600
If the patch version is less then 114600-04, update the VLAN Utility software by
installing the 114600-04 patch.
50 Sun 10-Gigabit Ethernet PCI-X Adapter Installation and User's Guide • December 2005
Contents
U.S. copyright file
French copyright file
Contains the Sun 10-Gigabit Ethernet software source
rpm applicable to Linux operating systems:
• sun-10-gigabit-kernel-1.0.version-1.src.rpm
Contains the Sun 10-Gigabit Ethernet software packages
applicable to SPARC architecture software:
• SUNWixgea—adb macros
• SUNWixged.u—adapter driver
• SUNWixgedu—adapter driver header files
The optional VLAN packages:
• SUNWvld—VLAN utility routines
• SUNWvldx—VLAN utility routines (64-bit, s9)
• SUNWvldu—VLAN utility headers