Table of Contents
Advertisement
To Set Driver Parameters Using a ixge.conf
File
1. Obtain the hardware path names for the ixge devices in the device tree.
a. Check the /etc/driver_aliases file to identify the name associated with a
particular device:
# grep ixge /etc/driver_aliases
ixge "pci8086,1048.108e.7036"
Note – ixge "pci8086,1048.108e.7036" is used by the Sun 10-Gigabit Ethernet
adapter.
b. Locate the path names and the associated instance numbers in the
/etc/path_to_inst file.
# grep ixge /etc/path_to_inst
"/pci@9,600000/ethernet@1" 0 "ixge"
Chapter 3 Configuring Driver Parameters
27
Advertisement
Table of Contents
Need help?
Do you have a question about the Ethernet PCI-X Adapter and is the answer not in the manual?