11
134
3. At the boot prompt, type the show-nets command to get a list of possible
interfaces.
ok show-nets
A listing similar to the following example will be displayed:
a) /pci@b,2000/pf@2
b) /pci@a,2000/pf@2
c) /pci@b,4000/SUNW,hme@1,1
d) /pci@1,2000/pf@2
e) /pci@0,2000/pf@2
f) /pci@0,4000/SUNW,hme@1,1
g) /sbus@f,0/sbf@),7ff0
h) /sbus@f,0/SUNW,hme@3,8c00000
i) /sbus@e,0/nf@1,7ff0
j) /sbus@3,0/nf@0,7ff0
m) MORE SELECTIONS
q) NO SELECTION
Enter Selection, q to quit
4. Type the letter of your selection.
Your selection will not appear on the screen. It will be copied into the
buffer.
5. At the prompt, type boot then press CTL-y to paste your selection.
Warning – Once a diskless client has been booted over the SunFDDI/P
interface, do not move the SunFDDI/P card to a different slot.
SunFDDI/P 1.0 Adapter User's Guide—May 1997