How To Install Tubeless Tire On Giant Tubeless Ready Wheelsystem - Giant WheelSystem Manual

How to install tubeless tire on Giant Tubeless Ready
WheelSystem:
Step 1:
Start from the opposite side of the valve, insert one side of the tire bead in the lowest part of
the rim bed (at  in figure below, center bottom of the whole rim).
Step 2:
Start from the opposite side of valve, insert the other side of the tire bead in the lowest part of
the rim bed (at  in figure below). Make sure to work toward the valve as shown in figure
below. Insert the beads of both side of the tire all around the rim in the lowest parts of the rim
bed to finish the installation.
tire installation lubricant may reduce the resistance of installation. Giant Tubeless System
lubricant can be purchased from your Giant bicycle retailer.)
Opposite side of valve
（
Please DO NOT use a tire lever during the installation. Use of
Valve
4