Getting Started - Sun Microsystems SUN NETRA CP3000 User Manual

Advanced mezzanine card pcie hard drive and sas controller

Table of Contents

C H A P T E R

Getting Started

This chapter provides information and procedures needed to install and make the

Sun Netra CP3000 AMC.1-HDD SAS disk operational. This chapter should be read

before unpacking and installing the AMC.

In addition to this chapter, refer to the following safety document:

Important Safety Information for Sun Hardware Systems (816-7190)

Caution - When the system is plugged in, energy hazards are present on the

midplane. Do not reach into the enclosure while the power is on.

Caution - Static electricity can damage electronic components. Wear a wrist strap

grounded through one of the system's ESD ground jacks when removing and

replacing hot-swappable components.

This chapter contains the following topics:

■

■

■

■

■

■

Section 1.7, "Enabling and Disabling SAS Ports" on page 1-18

■

1-1

Table of Contents

Table of Contents

Do you have a question about the SUN NETRA CP3000 and is the answer not in the manual?